SECTION 165:25-18-4. Inspection for compliance

(a)   All storage tank systems regulated by this Chapter must be physically inspected for compliance with the provisions of this Chapter.

(b)   These inspections may include, but not necessarily be limited to, review of:

(1)   Records of installation.

(2)   Records of repair and retrofit operations including required tightness testing.

(3)   Release containment practices.

(4)   Release detection practices.

(5)   Compliance with prior Commission orders to perform corrective action.

(6)   Records of removal and closure.

(7)   Records that document compatibility with underground storage tank systems storing regulated substances greater than ten percent (10%) ethanol or twenty percent (20%) biodiesel.

(8)   Records of annual operation and maintenance tests on the electronic and mechanical components of release detection equipment.

(9)   Site assessments for groundwater or vapor monitoring

(10)   Current permit for all tanks located at the facility

(11)   Current operator training certificates for all classes of operators.

(c)   In addition, PSTD may perform any other inspection, testing, or monitoring necessary to ensure compliance with this Chapter and to protect property, human health, safety and welfare and the environment.

[Source: Added at 18 Ok Reg 2378, eff 7-1-01; Amended at 25 Ok Reg 1867, eff 7-1-08; Amended at 34 Ok Reg 935, eff 9-11-17]