SECTION 165:25-2-2. Incorporated codes and standards

  Specific references to documents are made in this Chapter. Each of these documents or part thereof is included by reference as a standard. New editions of codes and standards supersede all previous editions. Commission rules will supersede in all conflicts between PSTD rules and any industry standard. These codes and standards will be updated periodically through a formal rulemaking procedure initiated by PSTD to reflect any substantive or relevant changes.

(1)   National Fire Protection Association Standards:

(A)   Standard Number 30, 2018, "Flammable and Combustible Liquids Code."

(B)   Standard Number 329, 2015, "Handling Releases of Flammable and Combustible Liquids and Gases."

(C)   Standard Number 385, 2017, "Tank Vehicles for Flammable and Combustible Liquids."

(D)   Standard Number 326, 2015, "Safeguarding Tanks and Containers for Entry, Cleaning and Repair."

(E)   Standard Number 30A, 2018, "Motor Fuel Dispensing Facilities and Repair Garages."

(2)   American Petroleum Institute Standards

(A)   Recommended Practice 1615, (2011), "Installation of Underground Hazardous Substances or Petroleum Storage Systems, Sixth Edition."

(B)   Recommended Practice 1632, (R2010), "Cathodic Protection of Underground Storage Tank and Piping Systems."

(C)   Recommended Practice 1604, (R2010), "Closure of Underground Petroleum Storage Tanks, Third Edition."

(D)   Recommended Practice 1631, (2001), "Interior Lining and Periodic Inspection of Underground Storage Tanks."

(E)   Recommended Practice 1621, (R2012), "Bulk Liquid Stock Control at Retail Outlets."

(F)   Recommended Practice 1626, (2010), "Storing and Handling Ethanol and Gasoline - Ethanol Blends at Distribution Terminals and Service Stations."

(G)   Recommended Practice 1627, (R2000), "Storing and Handling of Gasoline - Methanol/Cosolvent Blends at Distribution Terminals and Service Stations."

(H)   Publication 1628, (1996), "A Guide to the Assessment and Remediation of Underground Petroleum Releases."

(I)   Publication 2200, (2015), "Repairing Crude Oil, Liquified Petroleum Gas, and Product Pipelines, Fourth Edition."

(J)   Publication 2015, (2018), "Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks."

(K)   Recommended Practice 1637, (R2012), "Using the API Color Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals, Third Edition."

(3)   National Association of Corrosion Engineers:

(A)   Standard Number SP0169-2013, "Control of External Corrosion on Underground or Submerged Metallic Piping Systems."

(B)   Standard Number SP0285-2011, "External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection."

(C)   Standard Number SP0286-2007, "Electrical Isolation of Cathodically Protected Pipelines."

(D)   International Test Method, TM 0101 2012, "Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems."

(E)   International Test Method, TM 0497 2012, "Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems."

(4)   Underwriter's Laboratory Standards:

(A)   Standard UL58, 2018, "Steel Underground Tanks for Flammable and Combustible Liquids."

(B)   Standard UL1316 Bulletin 2013, "Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures."

(C)   Standard UL1746 Bulletin 2013, "External Corrosion Protection Systems for Steel Underground Storage Tanks."

(D)   Standard UL567 Bulletin-2012, "Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas."

(E)   Standard UL971 Bulletin 2011, "Nonmetallic Underground Piping for Flammable Liquids."

(5)   American Society for Testing Materials:

(A)   ASTM E1739-95 (2015), "Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites."

(B)   ASTM G158-98 (2016), "Three Methods of Assessing Buried Steel Tanks."

(6)   Petroleum Equipment Institute:

(A)   PEI/RP 100-17 (2017 Edition) "Recommended Practices for Installation of Underground Liquid Storage Systems."

(B)   PEI/RP 400-18 (2018 Edition), "Recommended Practices for Equipment Testing Electrical Continuity of Fuel Dispensing Hanging Hardware."

(C)   PEI/RP 500-11 (2011 Edition), "Recommended Practice for Inspection and Maintenance of Motor Fuel Dispensing Equipment."

(D)   PEI/RP 900-17 (2017 Edition), "Recommended Practices for the Inspection and Maintenance of UST Systems."

(E)   PEI/RP 1200-17 (2017 Edition), "Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities."

(F)   PEI/RP 1700 (2018 Edition), "Recommended Practices for the Closure of Underground Storage Tank and Shop-Fabricated Aboveground Storage Tank Systems."

(7)   Steel Tank Institute:

(A)   STIP3^®, "Specification and Manual for External Corrosion Protection of Underground Steel Storage Tanks."

(B)   STI-R892-91, "Recommended Practice for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems."

(C)   STI-R894-91, "Specification for External Corrosion Protection of FRP Composite Underground Steel Storage Tanks."

(D)   RP-972-10, "Recommended Practice For The Addition of Supplemental Anodes to STI-P3 USTs."

(E)   STI-ACT-100-U^®, F961, "Specification for External Corrosion Protection of Composite Steel Underground Storage Tanks".

(F)   STI-F841, "Standard for Dual Wall Underground Steel Storage Tanks."

(G)   STI-F922, "Specification for Permatank^®."

(H)   RP-R051, "Cathodic Protection Testing Procedures for STI-P3^® Underground Storage Tank Systems."

(8)   Factory Mutual 1920, "Flexible Pipe Couplings."

(9)   National Leak Prevention Association Standard 631, "Spill Prevention, Minimum 10 Year Life Extension, Existing Steel UST by Lining without Additional Cathodic Protection."

(10)   National Groundwater Association, 1986, "RCRA Ground Water Monitoring Technical Enforcement Guidance Document (TEGD)."

(11)   U.S. Environmental Protection Agency Office of Water, 1997, Drinking Water Advisory: "Consumer Acceptability Advice on Health Effects Analysis on Methyl Tertiary-Butyl Ether (MTBE)."

(12)   Ken Wilcox Associates, Inc., First Edition: "Recommended Practice for Inspecting Buried Lined Steel Tanks Using a Video Camera."

[Source: Added at 21 Ok Reg 2036, eff 7-1-04; Amended at 23 Ok Reg 137, eff 10-6-05 (emergency); Amended at 23 Ok Reg 2261, eff 7-1-06; Amended at 25 Ok Reg 1867, eff 7-1-08; Amended at 26 Ok Reg 1826, eff 7-1-09; Amended at 32 Ok Reg 780, eff 8-27-15; Amended at 33 Ok Reg 604, eff 8-25-16; Amended at 34 Ok Reg 935, eff 9-11-17; Amended at 36 Ok Reg 551, eff 8-1-19; Amended at 37 Ok Reg 1128, eff 10-1-20]