SECTION 165:26-1-31. 1 Codes and standards

(a)   Specific references to documents listed below are made throughout the Aboveground Storage Tank Rules. Each of these documents or parts thereof is adopted and incorporated by reference as a standard. In the event these rules are in conflict with any of the standards set forth below, the provisions of these rules shall prevail. New editions of codes and standards supersede all previous editions. These codes and standards will be updated periodically through a formal rulemaking procedure initiated by PSTD to reflect any substantive or relevant changes. A copy is available for inspection at the Offices of the Petroleum Storage Tank Division during regular business hours.

(1)   American National Standards Institute (ANSI) Standards: American Society of Mechanical Engineers (ASME):

(A)   ASME B31.3 2016, "Process Piping."

(B)   ASME B31.4- 2016, "Pipeline Transportation Systems for Liquids and Slurries."

(2)   American Petroleum Institute (API) Standards:

(A)   API RP 652, "Lining of Aboveground Petroleum Storage Tank Bottoms," Second Edition, April, 2014.

(B)   API 1628 SET, "A Guide to the Assessment and Remediation of Underground Petroleum Releases."

(C)   API 653, "Tank Inspection, Repair, Alteration, and Reconstruction, 2018."

(3)   American Society for Testing and Materials (ASTM) Standards: ASTM E1739-95 (2015), "Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites."

(4)   National Association of Corrosion Engineers (NACE) Standards: NACE SP0169-2013, "Control of External Corrosion on Underground or Submerged Metallic Piping Systems."

(5)   National Fire Protection Association (NFPA) Standards:

(A)   Standard Number 30, 2018, "Flammable and Combustible Liquids Code."

(B)   Standard Number 30A, 2018, "Motor Fuel Dispensing Facilities and Repair Garages."

(6)   Underwriter's Laboratory (UL) Standards:

(A)   Standard UL142, 2006, "Steel Aboveground Tanks for Flammable and Combustible Liquids."

(B)   Standard UL842, 2015, "Valves for Flammable Fluids."

(C)   Standard UL971, 2011, "Nonmetallic Underground Piping for Flammable Liquids."

(7)   Petroleum Equipment Institute: Publication PEI/RP 200-13, "Recommended Practices for Installation of Aboveground Storage Systems for Motor Vehicle Fueling." (2013 Edition)

(8)   "Spill Prevention, Control and Countermeasure Regulation," 40 CFR 112

(b)   The standards set forth in (a) of this Section are also available from the following sources:

(1)   American National Standards Institute (ANSI), Thirteenth Floor; 11 West 42^nd Street, New York City, New York, 10036; Telephone: [phone].

(2)   American Society of Mechanical Engineers (ASME), Three Park Ave., 23S2, New York, NY 10016-5990; Telephone [phone].

(3)   American Petroleum Institute (API), Publications and Distribution, 1220 "L" Street, N.W., Washington, D.C. 20005-4070; Telephone [phone].

(4)   American Society for Testing and Materials (ASTM), 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428-2959; Telephone [phone].

(5)   National Association of Corrosion Engineers (NACE), 1440 South Creek Drive, Houston, Texas 77084; Telephone [phone].

(6)   National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, Massachusetts 02269-9101; Telephone [phone].

(7)   National Groundwater Association (NGWA), 601 Dempsey Road, Westeville, Ohio 43081; Telephone [phone].

(8)   Underwriter's Laboratory (UL), 333 Pfingsten Road, Northbrook, Illinois 60062; Telephone [phone], extension 2612.

(9)   Petroleum Equipment Institute, P.O. Box 2380, Tulsa, Oklahoma, 74101-2380; Telephone [phone].

[Source: Added at 9 Ok Reg 3739, eff 8-27-92; Amended at 12 Ok Reg 2057, eff 7-1-95; Amended at 14 Ok Reg 2515, eff 7-1-97; Amended at 15 Ok Reg 3020, eff 7-15-98; Amended at 17 Ok Reg 2875, eff 7-15-00; Amended at 21 Ok Reg 2079, eff 7-1-04; Amended at 23 Ok Reg 144, eff 10-6-05 (emergency); Amended at 23 Ok Reg 2297, eff 7-1-06; Amended at 25 Ok Reg 2187, eff 7-11-08; Amended at 26 Ok Reg 1831, eff 7-1-09; Amended at 32 Ok Reg 794, eff 8-27-15; Amended at 33 Ok Reg 615, eff 8-25-16; Amended at 34 Ok Reg 958, eff 9-11-17; Amended at 36 Ok Reg 576, eff 8-1-19]

Note

EDITOR’S NOTE: In 2006, the agency promulgated a new rule called "Consultation of Petroleum Storage Tank Division" at this Section number (165:26-1-31) in Chapter 26 [See 23 Ok Reg 2260, effective 7-1-06], creating a duplication in numbering. However, the new rule was promulgated in a Chapter 25 rulemaking action rather than a Chapter 26 action. To correct this scrivener's error and to avoid a duplication in numbering, the rule was editorially renumbered to an unused Section number in Chapter 25 (165:25-1-30.1) prior to codification.