SECTION 230:35-3-85.3. Removing election results storage device from voting device  


Latest version.
  •   Upon receipt of the voting device from the Inspector, County Election Board personnel immediately shall transfer the voting device to the designated secure work area for removal of the election results storage device. The following procedure shall be observed.
    (1)   Unlock and open the voting device case with the square key.
    (2)   Verify the seal number on the cover of the compartment containing the storage device against the Inspector's Notes to Secretary sheet. Cut and remove the seal.
    (3)   Unlock and remove the compartment cover with the square key.
    (4)   Remove the election results storage device.
    (5)   Verify that the correct precinct number is recorded on the storage device label.
    (6)   Transfer the election results storage device to the tabulation computer operator to be read and tabulated.
[Source: Added at 30 Ok Reg 1672, eff 7-15-13; Amended at 34 Ok Reg 1130, eff 9-11-17]