SECTION 252:100-43-1.1. Definitions

  The following words and terms, when used in this Subchapter shall have the following meaning:

"Method" means a formalized program for the measurement, analysis, and reporting of the physical and chemical properties of a process.

"Monitoring" means any form of collecting data on a routine basis to determine or otherwise assess compliance with emission limitations or standards. Recordkeeping may be considered monitoring where such records are used to determine or assess compliance with an emission limitation or standard (such as records of raw material content and usage, or records documenting compliance with work practice requirements). Monitoring may include one or more than one of the following data collection techniques, where appropriate for a particular circumstance:

(A)   Continuous emission or opacity monitoring systems.

(B)   Continuous process, capture system, control device or other relevant parameter monitoring systems or procedures, including a predictive emission monitoring system.

(C)   Emission estimation and calculation procedures (e.g., mass balance or stoichiometric calculations).

(D)   Maintenance and analysis of records of fuel or raw materials usage

(E)   Recording results of a program to conduct specific operation and maintenance procedures.

(F)   Verification of emissions, process parameters, capture system parameters, or control device parameters using portable or in situ measurement devices.

(G)   Visible emission observations.

(H)   Any other form of measuring, recording, or verifying on a routine basis emissions, process parameters, capture system parameters, control device parameters or other factors relevant to assessing compliance with emission limitations or standards.

"Test" means the collection of data resulting from the execution of a method.

[Source: Added at 20 Ok Reg 1130, eff 6-1-03]