SECTION 252:653-7-2. Permit application requirements

  The following shall be included in an application for a construction permit for any recharge well, infiltration basin and/or other water delivery mechanism.

(1)   Site description. A description of the ASR site.

(2)   Map. A map showing the location of the proposed recharge wells and/or infiltration basins for which a permit is being sought and the applicable extent of the area of hydrologic effect of the project. Within the area of hydrologic effect, the map must show the number, or name, and location of all oil and gas wells, dry holes, artificial penetrations, surface bodies of water, springs, wetlands, mines (surface and subsurface), quarries, water wells and other pertinent surface features including residences and roads. The map should also show faults, if known or suspected, and areas of known or suspected contamination. Public records which verify the information regarding all oil and gas wells, water wells, dry holes, and areas of known contamination submitted on the map shall also be included.

(3)   Geologic cross-sections. Maps and cross-sections detailing the geologic structure and stratigraphy to include the area of hydrologic effect.

(4)   Operations. Proposed operating data.

(5)   Contingency plans. Contingency plans to cope with system failures.

(6)   Groundwater monitoring plan. A plan for monitoring groundwater for changes in water level and water quality. All groundwater monitoring wells shall be constructed as required in OAC 785:35.

(7)   Run-on/run-off. Estimated annual precipitation, evaporation, transpiration, and recharge rates in the area of hydrologic effect.

(8)   Raw water and Aquifer Characterization. The results of the raw water and aquifer characterization required in Subchapter 3.

(9)   Additional information. Any additional information DEQ determines to be necessary based on information obtained from the Raw Water and Aquifer Characterization.

[Source: Added at 35 Ok Reg 1333, eff 9-15-18]