SECTION 35:30-17-104. Minimum information required for a WIR

(a)   A WIR shall include, but not be limited to, the following:

(1)   The address or location of the property inspected.

(2)   The type of construction as determined by visual inspection, including, but not limited to, the following:

(A)   Specify the type of stemwall, whether brick, concrete blocks, or any other type.

(B)   Specify the type of floor, whether wood, concrete slab, or any other type.

(C)   Specify any areas under the floor, whether a crawl space, basement, or any other area.

(D)   Specify the type of exterior, whether wood, wood veneer, stucco, fiberboard, brick or stone, concrete block, aluminum or vinyl siding, or any other type, including combinations of types.

(E)   Specify the type of piers, whether wood, concrete blocks, or any other type.

(3)   A description of any inaccessible or visually obstructed areas.

(4)   A description of any visible conditions conducive to termites or other wood destroying insects, including wood to ground contact, remaining form boards, excessive moisture, debris under or around the structure, visible wood flooring over slab, stucco siding, crawl space clearance resulting in insufficient separation between soil and wood, expansion joints or cracks in slabs, decks in contact with the structure, dense foliage in contact with the structure, wood piles in contact with the structure, or any other condition.

(5)   A description of visible evidence of termite activity, including live termites, termite tubes or frass, evidence of previous infestation or treatment, or winged adults.

(6)   A description of visible evidence of termite damage.

(7)   A description of visible evidence of damage or activity by other wood destroying insects.

(8)   If no visible evidence is present, the WIR shall so state.

(b)   Each page of the WIR shall indicate the address or location of the property and the date of the inspection.

[Source: Added at 20 Ok Reg 1537, eff 6-12-03; Amended at 25 Ok Reg 1818, eff 7-1-08]