SECTION 380:80-9-3. Decals and conversion reporting procedure

(a)   After an alternative fuel conversion or modification of equipment is completed for any motor vehicle, the technician shall affix a blue CNG diamond, black propane diamond or green EV diamond, whichever is applicable, according to NFPA pamphlet No. 52.

(b)   No certified technician shall install, service, repair or modify any motor vehicle, capable of operating on an alternative fuel that does not have the required decals.

(c)   Converted alternative fueled vehicles shall have placed on the vehicle, decals & labels required by NFPA and the following:

(1)   The date of installation;

(2)   The name of the installing technician; and,

(3)   State of Oklahoma Certification number of the alternative fuels equipment technician.

(4)   The expiration date of time sensitive parts and components used in the conversion.

(5)   Converted vehicle information: year, make, model, and vehicle identification number (VIN).

(d)   The following reporting procedure must be performed after each vehicle conversion:

(1)   On forms, provided by the Administrator, each vehicle converted shall be reported to the Administrator by the alternative fuels technician. Information deemed necessary by the agency shall be included on the form. These forms must be sent to the Administrator no later than ten (10) days after the completion of the conversion. Photocopying of these forms is permissible.

(2)   The penalty for failure to comply with OAC 380:80-9-3(d)(1) shall be determined by the Agency.

[Source: Added at 32 Ok Reg 735, eff 6-30-15 (emergency); Added at 33 Ok Reg 1735, eff 9-15-16]