SECTION 40:50-1-3.2. Reporting requirements

(a)   Reportable violations are as follows:

(1)   Three (3) penalty fails, at startup, within a fifteen (15) minute time frame.

(2)   A circumvention.

(3)   Three (3) retest violations constitute a reportable violation. Each retest violation thereafter constitutes a reportable violation.

(4)   Removal of the device.

(5)   Tampering.

(6)   Permanent lockout.

(b)   Reportable violations shall be reported to the Installation Authority and/or Monitor, in the form and/or format designated by the Board, within five business days, banking holidays excepted, after a maintenance and calibration service, violation reset service or removal of the device.

(c)   The manufacturer shall ensure proper record maintenance.

(d)   The manufacturer shall report to the Board, in the form and format designated by the Board:

(1)   Device installations.

(2)   Device removals.

(3)   Any reportable violations.

(4)   Maintenance and calibration performed on an ignition interlock device as required by these rules.

[Source: Added at 27 Ok Reg 2667, eff 8-26-10; Amended at 32 Ok Reg 15369, eff 9-11-15; Amended at 33 Ok Reg 1190, eff 9-11-16; Amended at 35 Ok Reg 791, eff 9-14-18; Amended at 36 Ok Reg 1520, eff 9-14-19; Amended at 37 Ok Reg 1001, eff 9-11-20]