SECTION 40:50-1-7.3. Inactivation, suspension, and revocation  


Latest version.
  • (a)   Inactivation. Inactivation refers to the voluntary or temporary discontinuance of a license.
    (1)   A service center license may be inactivated by the Board:
    (A)   Upon request from the vendor or service center manager, or
    (B)   If the service center no longer employs at least one (1) licensed ignition interlock technician.
    (2)   A licensed service center whose license has expired or no longer meets all the requirements for licensure shall be inactivated.
    (3)   Upon inactivation, the Board shall forward the notice and order of inactivation of the service center license to the vendor and service center manager specifying the basis for the inactivation.
    (4)   Inactivation shall be used for administrative program control to safeguard the scientific integrity of the device program.
    (b)   Suspension. Suspension refers to the immediate curtailment of a license.
    (1)   Suspension of a service center license may be initiated by a designated representative of the Board when, because of unreliability, incompetence, or violation of these rules, the service center is not in compliance with the provisions stated in these rules or when, in the opinion of the designated representative of the Board, the continuance of such licensure would not uphold the scientific integrity of the device program and enforcing these rules.
    (2)   Upon suspension the designated representative of the Board shall provide the vendor and service center manager with a notice and order of suspension of the service center license specifying the basis for the suspension.
    (3)   The Board, in its sole discretion, shall determine the period of suspension.
    (4)   A suspension curtails any license issued to the service center for the period of suspension until reinstatement of the license.
    (5)   Suspension issued by the Board may prohibit the issuance of official installation verification forms, or the provision of calibration and maintenance services, or both.
    (6)   Suspension shall be for the purpose of maintaining the scientific integrity of the device program and enforcing these rules.
    (7)   Licensure of a service center whose license has been suspended will require a written request from the applicant to the Board and successful completion of the original requirements for licensure outlined in this subsection.
    (c)   Revocation. Revocation refers to the immediate cancellation of a license.
    (1)   A service center license may be revoked by the Board when, in the opinion of the Board, the service center no longer meets the requirements of these rules because of unreliability, incompetence, or violation of these rules, or in any case where, in the opinion of the Board, continuance of licensure would not uphold the scientific integrity of the ignition interlock program.
    (2)   A revocation cancels any license issued to the service center for the period of revocation.
    (3)   The Board, in its sole discretion, shall determine the period of revocation.
    (4)   Upon revocation, the Board shall forward the notice and order of revocation of the service center license to the vendor and service center manager specifying the basis for the revocation.
    (5)   During the period of revocation, the revoked service center shall cease any and all activities related to the installation, maintenance and calibration, removal and any other services related to any device in the state of Oklahoma.
    (6)   Licensure of a service center whose license has been revoked will require a written request from the applicant to the Board and successful completion of the original requirements for licensure outlined in this subsection.
    (7)   Revocation shall be for the purpose of maintaining the scientific integrity of the device program and enforcing these rules.
    (d)   A manufacturer shall be responsible for providing continuing service by a licensed service center during the installation period, without interruption, should a service center's license be inactivated or revoked. The vendor, on or before the effective date of an order for inactivation or revocation shall cause the immediate cessation of installation, maintenance and calibration, removal and any other services related to any device at the inactivated or revoked service center. Any inactivated or revoked service center shall not be able to generate official installation verification forms.
    (e)   If the inactivated or revoked service center is being replaced by the manufacturer, the new licensed service center must be located within 40 driven miles, as determined by the Board, of the service center that was inactivated or revoked. Failure of the manufacturer to license a new service center in accordance with this paragraph within 30 days of the inactivation or revocation will subject the manufacturer to the provisions of paragraph (f) of this rule. All reasonable efforts shall be made by the manufacturer representative to obtain participant records and data from the service center being replaced and provide them to the new licensed service center. The new licensed service center shall credit each participant all monies paid to the inactivated or revoked service center by the participant for deposits, unrealized lease or services.
    (f)   If the new licensed service center is not located within 40 driven miles, as determined by the Board, of the inactivated or revoked service center or the inactivated or revoked service center is not being replaced within the timeframe established by paragraph (e) of this rule, the manufacturer shall:
    (1)   Make all reasonable efforts to obtain participant records and data from the service center being inactivated or revoked.
    (2)   Be responsible for, and shall bear the cost of:
    (A)   Removal of the installed device and facilitate the simultaneous installation of another certified device of the participant's choice, regardless of the manufacturer of the device being substituted or the location of the licensed service center chosen by the participant.
    (B)   Retrieval of the device removed by a licensed service center representing a different manufacturer. Upon removal, the licensed service center removing the original device shall notify the vendor, as soon as possible, of the original device as to where the original device may be retrieved.
    (3)   Reimburse the participant, within 30 days of removal of the original device, all monies paid to the inactivated or revoked service center by the participant for deposits, unrealized lease or advance payments remitted on behalf of the participant for unrealized services.
    (4)   The manufacturer shall make every reasonable effort to notify all participants effected by the inactivation or revocation of a service center's license 30 days before the inactivation or revocation will occur, or as soon as is possible.
[Source: Added at 27 Ok Reg 2667, eff 8-26-10; Amended at 32 Ok Reg 1536, eff 9-11-15; Amended at 33 Ok Reg 1190, eff 9-11-16; Amended at 35 Ok Reg 791, eff 9-14-18]