SECTION 460:30-3-10. Mining permit maps and cross sections: Environmental resources  


Latest version.
  • (a)   The mining permit application that includes the placement of CCB as a part of
    its reclamation plan shall contain the following environmental resources maps:
    (1)   Locations and elevations of drill holes used to obtain soil, hydrologic, or geologic information.
    (2)   Locations and elevations of monitoring points used to obtain surface and ground water information used to prepare the mining permit application.
    (3)   Location of active, inactive, reclaimed, or abandoned surface and underground mines.
    (4)   Location of surface water bodies such as streams, ponds, lakes, springs, and irrigation ditches within and adjacent to the proposed mining permit area.
    (5)   Location of existing areas of mine and non-mine wastes, including CCB.
    (6)   Location of water, oil and gas wells within the proposed mining permit area.
    (7)   Potentiometric map indicating ground water elevations and movement of ground water in the mining permit area. Previously published data and mapping representative of the area may be utilized to comply with this requirement.
    (8)   Cross sections passing through the proposed CCB placement area. Such cross sections shall show relevant geologic and hydrologic information, and other relevant information as specified by the Department. The number of cross sections required is to be determined by the Department.
    (9)   Location of soil series units under the proposed mining permit area.
    (10)   A map showing the permit area in relation to 100-year flood plain areas as shown on maps published by the Untied States Geological Survey in cooperation with the United States Department of Housing and Urban Development.
    (b)   Other relevant environmental resources information may be required by the Department on maps as part of its review.
[Source: Added at 20 Ok Reg 2819, eff 8-26-03]