SECTION 595:30-3-25. Unitized equipment  


Latest version.
  • (a)   To obtain unitized equipment permit or endorsement to an oversize permit, the following information is required:
    (1)   make and model of vehicle,
    (2)   vehicle length (truck),
    (3)   wheelbase measurement,
    (4)   protrusion measurements (front and rear),
    (5)   measurement of lowest point of protrusion above road surface.
    (b)   The protrusion shall bear luminous tape sufficient to warn the public of the extent of the protrusion.
[Source: Amended at 11 Ok Reg 229, eff 10-10-93 (emergency); Amended at 11 Ok Reg 2391, eff 5-26-94]