Oklahoma Administrative Code (Last Updated: March 11, 2021) |
TITLE 252. Department of Environmental Quality |
Chapter 616. Industrial Wastewater Systems |
Subchapter 1. Introduction |
SECTION 252:616-1-1. Purpose |
SECTION 252:616-1-2. Definitions |
SECTION 252:616-1-3. Engineer Required |
Subchapter 3. Permit Procedures |
SECTION 252:616-3-1. Requirement to obtain a permit |
SECTION 252:616-3-2. Duration of permit and renewal |
SECTION 252:616-3-3. Fees |
SECTION 252:616-3-4. Applications |
SECTION 252:616-3-5. Terms and conditions of permits |
Subchapter 5. General Standards |
SECTION 252:616-5-1. Site and system |
SECTION 252:616-5-2. Maintenance and Operation Plan (MOP) |
SECTION 252:616-5-3. Reporting |
SECTION 252:616-5-4. Monitoring |
Subchapter 7. Surface Impoundment Standards |
SECTION 252:616-7-1. Construction and maintenance |
SECTION 252:616-7-2. General liner requirements |
SECTION 252:616-7-3. Compacted clay liners |
SECTION 252:616-7-4. Synthetic liners |
SECTION 252:616-7-5. Composite liners |
SECTION 252:616-7-6. Soil and bentonite liners |
SECTION 252:616-7-7. Concrete liners |
Subchapter 9. Tank System Standards |
SECTION 252:616-9-1. Authorized use of tank systems |
SECTION 252:616-9-2. Tank system materials |
SECTION 252:616-9-3. Tank system requirements |
Subchapter 11. Land Application Standards |
SECTION 252:616-11-1. Restrictions |
SECTION 252:616-11-2. Rates and frequencies |
SECTION 252:616-11-3. Operation restrictions |
SECTION 252:616-11-4. Site management |
SECTION 252:616-11-5. Recordkeeping |
SECTION 252:616-11-6. Dust Suppression |
SECTION 252:616-11-7. Sludge Management Plans |
SECTION 252:616-11-8. Heavy Metals |
Subchapter 13. Closure Standards |
SECTION 252:616-13-1. Termination of activities |
SECTION 252:616-13-2. Pre-closure sampling and analysis plan |
SECTION 252:616-13-3. Closure plan submittal and amendment |
SECTION 252:616-13-4. Closure performance and certification |
SECTION 252:616-13-5. Post-closure maintenance plan (PCMP) |
Appendix A. Application for Permit to Discharge and/or Treat Industrial Wastewater of Sludge General Information [revoked] |
Appendix B. Application for Permit to Discharge and/or Treat Industrial Wastewater or Sludge Surface Impoundments and Septic Tanks [revoked] |
Appendix C. Table of Rainfall and Evaporation Data |
Appendix D. Class III Surface Impoundment Design |
Appendix E. Generic Closure Plan for Class III Impoundments |
Note
[Authority: 27A O.S., §§ 1-3-101, 2–2–101, 2-2-201, and 2–6–101 et seq.]
[Source: Codified 6-12-00]