 |
Oklahoma Administrative Code (Last Updated: March 11, 2021) |
 |
TITLE 785. Oklahoma Water Resources Board |
|
|
Chapter 35. Well Driller and Pump Installer Licensing |
| Subchapter 1. General Provisions |
| SECTION 785:35-1-1. Purpose |
| SECTION 785:35-1-2. Definitions |
| SECTION 785:35-1-3. General statutory authority |
| SECTION 785:35-1-4. Violations and penalties |
| SECTION 785:35-1-5. Indemnity Fund |
| SECTION 785:35-1-6. Well Drillers and Pump installers Advisory Council |
| Subchapter 3. Licensing and Certifications |
| SECTION 785:35-3-1.1. Activities authorized; electrician and plumbing license |
| SECTION 785:35-3-1. Licensing procedures |
| SECTION 785:35-3-1.2. Military service occupation, education and credentialing |
| SECTION 785:35-3-2. Expiration and renewal of licenses and certifications |
| SECTION 785:35-3-3. Revocation, suspension or non-renewal of licenses and certifications |
| Subchapter 5. General Requirements to Maintain Licenses and Operator Certifications |
| SECTION 785:35-5-1. General requirements for licenses |
| SECTION 785:35-5-2. General requirements for certified operators |
| SECTION 785:35-5-3. Requirements for multi-purpose completion report |
| Subchapter 7. Minimum Standards for Construction of Wells |
| SECTION 785:35-7-1. Minimum standards for construction of groundwater wells, fresh water observation wells, and water well test holes |
| SECTION 785:35-7-1.1. Minimum standards for construction of heat exchange wells |
| SECTION 785:35-7-2. Minimum standards for construction of monitoring wells and geotechnical borings |
| SECTION 785:35-7-3. Minimum standards for construction of marginal water wells |
| SECTION 785:35-7-4. Variances to minimum standards for construction of wells |
| Subchapter 9. Minimum Standards for Pump Installation |
| SECTION 785:35-9-1. Minimum standards for pump installation |
| SECTION 785:35-9-2. Variances to minimum standards for pump installations |
| Subchapter 11. Plugging and Capping Requirements for Wells and Test Holes |
| SECTION 785:35-11-1. Plugging and capping requirements for groundwater wells, fresh water observation wells, heat exchange wells and water well test holes |
| SECTION 785:35-11-2. Plugging requirements for site assessment observation wells, monitoring wells and geotechnical borings |
| SECTION 785:35-11-3. Variances to plugging requirements |
Note
[Authority: 82 O.S., §§ 1020.16 and 1085.2]
[Source: Codified 12-31-91]