SECTION 165:57-7-3. Requirements as to size, form and identification of tariffs

(a)   All tariffs shall be in loose leaf form of a size eight and one-half inches by eleven inches (8-1/2' x 11') and shall be plainly printed or reproduced on only one side of paper of good quality. The tariff shall be in the format presented in Appendix B to this Chapter. The front page of the tariff shall contain the name of the OSP and location of its principal office.

(b)   Tariff sheets are to be numbered consecutively. Each sheet shall show the Cause Number, wherein the tariff was approved by the Commission, and, where applicable, the Order Number for such approval. Each sheet shall show an effective date, an issue date, a revision number, section number or title, sheet number, name of the OSP along with all trade names used by the OSP, and the name of the tariff in a consistent manner. Sheets issued under new numbers are to be designated as original sheets. Sheets being revised should show the number of the revision, and the sheet numbers shall be the same.

[Source: Added at 12 Ok Reg 2157, eff 7-1-95; Amended at 14 Ok Reg 2872, eff 7-15-97; Amended at 15 Ok Reg 3092, eff 7-15-98; Amended at 19 Ok Reg 2005, eff 7-1-02]