SECTION 252:515-41-12. Operational requirements  


Latest version.
  • (a)   Acceptable wastes. Only roofing material shall be accepted at a roofing material recycling
    facility.
    (b)   Prohibited wastes. Non-Hazardous Industrial Waste, Hazardous Waste, and all other non-roofing material shall be prohibited.
    (c)   Roofing material. All roofing material recycling facilities shall separate the recyclable material from the material that will not be recycled. The non-recyclable material shall be kept in roll-offs or other containers that will prevent the material from blowing, leaching, or otherwise causing contamination. All non-recyclable material must be properly disposed at an approved disposal facility within thirty(30) days of receipt.
    (d)   Recyclable material. All roofing material that is intended for recycling must be kept in either containers or piles. Roofing material stored on the ground while awaiting processing shall be placed in piles, as follows:
    (1)   the base shall not exceed 200 feet by 150 feet;
    (2)   the height of the pile shall not exceed twenty feet; and
    (3)   stable side slopes must be maintained.
    (e)   Fire lane. An unobstructed fire lane at least 50 feet in width shall be maintained around the perimeter of each recyclable material pile.
    (f)   Buffer zone. A clean buffer zone of at least 50 feet shall be maintained between recyclable material piles and adjacent properties.
    (g)   Weighing roofing material. Each load of roofing material received shall be weighed on scales tested and certified in accordance with the requirements of the Oklahoma Department of Agriculture, Food and Forestry.
    (1)   Each truck and/or trailer shall be weighed full and empty.
    (2)   Gross and tare weights shall be imprinted on the same weight ticket.
    (3)   Stored tare weights shall not be used.
    (h)   Daily log. A daily log shall be maintained for each load of roofing material received. The daily log shall reflect:
    (1)   date and time;
    (2)   name and address of the hauler;
    (3)   weight;
    (4)   amount of non-recyclable material shipped to a permitted solid waste disposal site; and
    (5)   name and location of permitted solid waste disposal site receiving the non-recyclable material.