 |
Oklahoma Administrative Code (Last Updated: March 11, 2021) |
 |
TITLE 380. Department of Labor |
|
Chapter 50. Abatement of Friable Asbestos Materials Rules |
|
Subchapter 6. Training Requirements |
SECTION 380:50-6-3. Initial training for asbestos contractors and supervisors
Latest version.
- (a) In the State of Oklahoma, anyone seeking accreditation of licensure from the Department of Labor, must obtain their training from an EPA or DOL accredited training provider, including but not limited to education institution, labor union, or government agency, or from a private vocational education provider licensed by the state where it operates (pursuant to 70 O.S. § 21-103 within the state of Oklahoma) and accredited by EPA or an EPA approved governmental agency.(b) Such institutions, labor unions or government agencies may receive their DOL approval through the Oklahoma Accreditation Plan providing the following criteria are met:(1) The training for asbestos contractor/supervisor shall be specific to the discipline and shall not be combined with training for any other discipline.(2) The contractors/supervisor's course shall be no less than five days in length and shall include: lectures, demonstrations, at least 14 hours of hands-on training, individual respirator fit testing, course review and an written examination. Hands on training must permit contractor/supervisors to have actual experience performing tasks associated with asbestos abatement. The OAP also recommends the use of audio-visual materials to complement lectures, where appropriate. One day of training equals 8 hours, including breaks and lunch.(3) Course instruction must be provided by EPA or State approved instructors. EPA or State approval shall be based on a review of the instructor's academic credentials and/or field experience in asbestos abatement.(4) The training course for Contractors/Supervisors shall adequately address the following topics:(A) Physical characteristics of asbestos. Identification of asbestos, aerodynamic characteristics, typical uses, and physical appearance; review of hazard assessment considerations and a summary of abatement control options.(B) Potential health effects related to asbestos-exposure. The nature of asbestos-related diseases; routes of exposure; dose-response relationships and the lack of safe exposure levels; the synergistic effect between cigarette smoking and asbestos exposure; the latency periods for asbestos related diseases; a discussion of the relationship of asbestos exposure to asbestosis, lung cancer, mesothelioma and cancers of other organs.(C) Employee personal protective equipment. Classes and characteristics of respirator types; limitations of respirators; proper selection, inspection; donning, use, maintenance and storage procedures for respirators; methods for field testing of the facepiece-to-face seal (positive and negative pressure fit checks); qualitative and quantitative fit testing procedures; variability between field and laboratory protection factors that alter respiratory fit (e.g., facial hair, etc.) the components of a proper respiratory protection program; selection and use of personal protective clothing; use, storage and handling of non-disposable clothing; regulations covering personal protective equipment.(D) State-of-the-art work practices. Proper work practices for asbestos abatement activities, including descriptions of proper construction and maintenance of barriers and decontamination enclosure systems; positioning of warning signs; lock-out of electrical and ventilation systems; proper work techniques for minimizing fiber release; use of wet methods; use of negative pressure exhaust ventilation equipment; (HEPA)-vacuums; proper clean-up, load-out and disposal procedures; work practices for removal, encapsulation, enclosure, and repair of ACM; emergency procedures for sudden releases; potential exposure situations; transport and disposal procedures and recommended and prohibited work practices.(E) Personal hygiene. Entry and exit procedures for the work area; use of showers; avoidance of eating, drinking, smoking, chewing gum or tobacco, or applying cosmetics in the work area. Potential exposures, such as family exposures, shall also be included.(F) Additional safety hazards. Hazards encountered during abatement activities and how to deal with them, including electrical hazards, heat/cold stress, air contaminants other than asbestos, fire and explosion hazards, scaffolds and ladder hazards, slips, trips and falls and confined spaces.(G) Medical monitoring. OSHA Protection Rule requirements for physical examinations, including a pulmonary function test, chest X-rays, and a medical history for each employee.(H) Air monitoring. Procedures to determine airborne concentrations of asbestos fibers, including description of aggressive air sampling, sampling equipment and methods, reasons for air monitoring, types of sampling and interpretation of results.(I) Relevant Federal, State and local regulatory requirements and standards, including: requirements of TSCA Title II; requirements of NESHAP (40 CFR Part 61), Subpart A (General Provisions) and M (National Emission Standard for Asbestos); OSHA standards for permissible exposure levels and respiratory protection; Oklahoma Requirements for permissible exposure levels; OSHA Asbestos Construction Standards.(J) Respiratory Protection Programs and Medical Monitoring Programs.(K) Insurance and Liability issues and Contractor issues. Workers' compensation coverage and exclusions; third party liability and defenses, insurance coverage and exclusions; environmental impairment insurance.(L) Record keeping for asbestos abatement projects. Records required by Federal, State and Local regulations; records recommended for legal purposes.(M) Supervisory techniques for asbestos abatement activities. Supervisory practices to enforce and reinforce the required work practices and discourage unsafe work practices.(N) Contract specifications. Discussions of key elements that are included in contract specifications.(O) Course review. A review of key aspects of the training course.(c) In addition to the five day contractor/supervisor's course, anyone seeking licensure from the State of Oklahoma will be required to show current certification of the following additional training:(1) Cardio-Pulmonary Resuscitation from the American Heart Association, American Red Cross or other DOL approved provider(2) First Aid from the American Heart Association, American Red Cross or other DOL approved provider(3) NIOSH 582 or equivalent or a two day course in air monitoring practices and procedures(4) OSHA Confined Space Entry(5) Six months of experience on projects inspected by the DOL, including a minimum of six (6) different abatement projects or containments or one year of experience as an asbestos worker and six months as an asbestos supervisor on projects which have not been inspected by the DOL.