 |
Oklahoma Administrative Code (Last Updated: March 11, 2021) |
 |
TITLE 460. Department of Mines |
|
Chapter 20. The Permanent Regulations Governing the Coal Reclamation Act of 1979 |
|
Subchapter 43. Permanent Program Performance Standards: Surface Mining Standards |
SECTION 460:20-43-40. Backfilling and grading: thick overburden
Latest version.
- (a) Definition. Thick overburden means more than sufficient spoil and other waste materials available from entire permit area to restore the disturbed area to its approximate original contour. More than sufficient spoil and other waste materials occur where the overburden thickness times the swell factor exceeds the combined thickness of the overburden and coal bed prior to removing the coal, so that after backfilling and grading the surface configuration of the reclaimed area would not:(1) Closely resemble the surface configuration of the land prior to mining; or(2) Blend into and complement the drainage pattern of the surrounding terrain.(b) Performance standards. Where thick overburden occurs within the permit area, the permittee at a minimum shall:(1) Restore the approximate original contour and then use the remaining spoil and other waste materials to attain the lowest practicable grade, but not more than the angle of repose;(2) Meet the requirements of Sections 460:20-43-38(a)(2) through (j) of this Chapter; and(3) Dispose of any excess spoil in accordance with Sections 460:20-43-24 through 460:20-43-27 of this Chapter.