 |
Oklahoma Administrative Code (Last Updated: March 11, 2021) |
 |
TITLE 380. Department of Labor |
|
|
Chapter 25. Boiler and Pressure Vessel Rules |
|
|
Subchapter 7. General Requirements |
| SECTION 380:25-7-1. Inspection of boilers and pressure vessels |
| SECTION 380:25-7-2. Preparation for inspection |
| SECTION 380:25-7-3. Boilers and pressure vessels improperly prepared for inspection |
| SECTION 380:25-7-4. Removal of covering to permit inspection |
| SECTION 380:25-7-5. Lap seam crack |
| SECTION 380:25-7-6. Pressure tests |
| SECTION 380:25-7-7. Automatic low water fuel cutoff and/or water feeding device |
| SECTION 380:25-7-8. Pressure reducing valves |
| SECTION 380:25-7-9. Boiler blowoff equipment |
| SECTION 380:25-7-10. Location of discharge piping outlets |
| SECTION 380:25-7-11. Repairs or alterations |
| SECTION 380:25-7-12. Supports |
| SECTION 380:25-7-13. Boiler door latches |
| SECTION 380:25-7-14. Clearance |
| SECTION 380:25-7-15. Ladders and runways |
| SECTION 380:25-7-16. Exit from boiler |
| SECTION 380:25-7-17. Operation and maintenance |
| SECTION 380:25-7-18. Air and ventilation requirements - combustion air supply and ventilation of boiler room |
| SECTION 380:25-7-19. Conditions not covered by these rules and regulations |